IDT® miRNA Inhibitors

These steric blocking oligonucleotides hybridize to mature miRNAs and inhibit their function. IDT miRNA Inhibitors are RNA oligonucleotides comprised of 2'-O-methyl residues that confer increased binding affinity to RNA targets and resistance to endonuclease degradation, and ZEN™ modifications to block exonuclease degradation.

  • Effectively inhibit miRNA function in vitro using low nanomolar concentrations
  • Ensure sufficient miRNA knockdown with highly potent, highly specific reagents
  • Simplify your experiments with intuitive design and ordering tools



Order now

IDT miRNA Inhibitors

To order, simply copy the mature sequences for the miRNAs from miRBase, the miRNA database, into the miRNA Inhibitor ordering tool.

5 nmol IDT® miRNA Inhibitor (Standard Desalt)$149.00 USD
20 nmol IDT® miRNA Inhibitor (Standard Desalt)$449.00 USD
250 nmol IDT® miRNA Inhibitor (Standard Desalt)$1,249.00 USD
250 nmol IDT® miRNA Inhibitor (IE HPLC)$1,449.00 USD

The standard method for inhibiting microRNA (miRNA) function is by steric blocking, using an oligonucleotide that is perfectly complementary to the mature miRNA target. These inhibitors form a duplex with the miRNA guide strand and prevent the miRNA from binding to its intended target. Note that miRNA function is based on recognition of a seed region rather than complete homology between miRNA and target. Therefore, a single miRNA can regulate tens to hundreds of genes whose sequences do not share exact complementarity with the miRNA.

For effective miRNA inhibition, the binding affinity between the oligo inhibitor and the miRNA must be significantly higher than that between miRNA guide strand and passenger strand. The miRNA inhibitor must be capable of binding to the miRNA guide strand either in single-stranded form or when bound to an Argonaute protein in the miRNA-induced silencing complex (miRISC). The inhibitor should also be capable of displacing the natural passenger strand in double-stranded miRNA.

Adding a 2′ modification to ribose sugars in the RNA backbone can increase Tm and confer resistance to endonucleases [1]. 2′-O-Methyl RNA (2′OMe) is a naturally-occurring, nontoxic nucleic acid with a high binding affinity for RNA that provides the required resistance to mammalian endonucleases. Adding ZEN™ modifications to the termini of 2′OMe-modified oligonucleotides further increases the binding affinity of the miRNA inhibitors and confers resistance to exonucleases [1].

Where to find miRNA sequences

Mature miRNA sequences can be found in the miRNA database, miRBase [2–5]. Just copy the mature sequence for each miRNA and paste it into the IDT miRNA Inhibitor ordering tool.


We recommend using the following positive and negative controls for your miRNA modulation experiments.

Positive controls

miRNAs are expressed at various levels in different cell types; therefore, it can be difficult to find a good positive control. Ensure that the positive control that you select is expressed at sufficiently high levels to enable measurement of response.

A good positive control is miR-21-5p, which is conserved in many species and expressed at high levels in HeLa cells. Protein modulation can be confirmed by measuring expression of endogenous miR-21 targets, such as PTEN [6] and PDCD4 [6–9], or using a reporter assay.

Mature miR-21-5p sequence*
(copy and paste into IDT miRNA Inhibitor ordering tool)
Human, mouse, ratuagcuuaucagacugauguuga

* Note: mouse miRNA is miR-21a-5p.

Negative controls

A good negative control should be inert and not modulate any genes in the system under study. This is difficult to achieve; however, we propose 2 negative control sequences that we have used throughout our product development and validation process, and which we have found to work very well in vitro and in vivo.

(copy and paste into IDT miRNA Inhibitor ordering tool)
NC1 Negative Control (human)ucguuaaucggcuauaauacgc
NC5 Negative Control (human, mouse, rat)accauauugcgcguauagucgc


  1. Lennox, KA, Owczarzy R, et al. (2013) Improved performance of anti-miRNA oligonucleotides using a novel non-nucleotide modifier. Mol Ther Nucleic Acids, 2:e117.
  2. Kozomara A, Griffiths-Jones S (2011) miRBase: Integrating microRNA annotation and deep-sequencing data. Nucleic Acids Res, 39(Database Issue):D152–157.
  3. Griffiths-Jones S, Saini HK, et al. (2008) miRBase: tools for microRNA genomics. Nucleic Acids Res, 36(Database Issue):D154–158.
  4. Griffiths-Jones S, Grocock RJ, et al. (2006) miRBase: microRNA sequences, targets and gene nomenclature. Nucleic Acids Res, 34(Database Issue):D140–144.
  5. Frankel LB, Christoffersen NR, et al. (2008) Programmed cell death 4 (PDCD4) is an important functional target of the microRNA miR-21 in breast cancer cells. J Biol Chem, 283(2):1026–1033.
  6. Lu Z, Liu M, et al. (2008) MicroRNA-21 promotes cell transformation by targeting the programmed cell death 4 gene. Oncogene, 27(31):4373–4379.
  7. Yao Q, Xu H, et al. (2009) MicroRNA-21 promotes cell proliferation and down-regulates the expression of programmed cell death 4 (PDCD4) in HeLa cervical carcinoma cells. Biochem Biophys Res Commun, 388(3):539–542.

The success of miRNA inhibition experiments is dependent on several factors, the most important of which are potency, specificity, stability, and toxicity. High potency ensures that only small doses are required to produce the desired phenotype, also reducing toxicity of the administered compound. miRNA inhibitors that are specific to their target reduce the incidence of off-target effects, ensuring that any observed phenotypes are the result of the effect on the target under investigation. Stability and low toxicity are essential for in vivo experiments.

Figures 1–4 demonstrate the high potency, specificity, stability, and extremely low toxicity of IDT miRNA Inhibitors compared to other modified oligonucleotides.

Modification key

IDT miRNA InhibitorsUzC A A C A U C A G U C U G A U A A G C U Az
DNAt c a a c a t c a g t c t g a t a a g c t a
2’OMeU C A A C A U C A G U C U G A U A A G C U A
2’OMe 3PS EndsU*C*A*A C A U C A G U C U G A U A A G*C*U*A
2’OMe 3’inZENU C A A C A U C A G U C U G A U A A G C UzA
2’OMe 5’inZENUzC A A C A U C A G U C U G A U A A G C U A
2’OMe 3’inC3U C A A C A U C A G U C U G A U A A G C U+A
2’OMe 5’inC3U+C A A C A U C A G U C U G A U A A G C U A
2’OMe 5’inC3, 3’inC3 (2’OMe 2XC3)U+C A A C A U C A G U C U G A U A A G C U+A
DNA/LNA PSt*C*a*a*C*a*t*C*a*g* T*c*t*G*a*t*A*a*g* C*t*a

1 Lowercase = DNA; uppercase = RNA; red = LNA base; * = phosphorothioate linkage; z = ZEN™ insertion; + = C3 spacer.

High potency of IDT miRNA Inhibitors

Figure 1. IDT miRNA Inhibitors exhibit high potency. Oligonucleotides designed to target miR-21 were transfected at 0.3–30 nM in HeLa cells expressing the psiCHECK-miR-21 plasmid using Lipofectamine® RNAiMAX transfection reagent. The cells were lysed after 24 hr and analyzed for luciferase activity. Results were normalized with the internal firefly luciferase (FLuc) control and are shown as fold change in Renilla luciferase (RLuc) compared with the lipid reagent control, which was set at 1. Tm values for the various oligos are shown above the respective profiles.

High specificity of IDT miRNA Inhibitors

miRNA inhibitors with various modifications were tested against wild-type miR-21 and 3 "mutant" versions containing 1, 2, or 3 mismatches (Table 1). IDT miRNA Inhibitors demonstrated high specificity at all concentrations tested (Figure 2).

Table 1. Sequences of wild-type and "mutant" miR-21 used to test specificity of miRNA inhibitors.

Mutant type
miR-21 IDT miRNA Inhibitor sequences (5′ to 3′)*
Wild type (0 MUT)C A A C A U C A G U C U G A U A A G C U

* Mutated bases are indicated by bold, red notation.

Figure 2. IDT miRNA Inhibitors are highly specific. Different miR-21 inhibitors (n=5) were synthesized, complementary to wild-type miR-21 or containing 1, 2, or 3 mismatched—0 MUT, 1 MUT, 2 MUT, and 3 MUT, respectively. The inhibitors were transfected into HeLa cells expressing the psiCHECK-miR-21 plasmid. After 24 hr, the cells were lysed and analyzed for luciferase activity. Values were normalized with internal firefly luciferase (FLuc) control and reported as a fold change in Renilla luciferase (RLuc) compared with lipid reagent control, which was set at 1.

High nuclease stability of IDT miRNA Inhibitors

Figure 3. IDT miRNA Inhibitors are resistant to nucleases. 1.1 nmol of each oligonucleotide was incubated in (A) 10% FBS, high exonuclease environment; or (B) 20% mouse liver protein extract, high endonuclease environment, for the indicated lengths of time. Each reaction was analyzed on a denaturing polyacrylamide gel stained with methylene blue.

Low cellular toxicity of IDT miRNA Inhibitors

Figure 4. IDT miRNA Inhibitors exhibit low toxicity to cells. Modified oligonucleotides corresponding to a nontargeting negative control sequence, NC1, unrelated to any known human miRNA were transfected into HeLa cells at concentrations of 10, 30, and 100 nM to investigate and compare toxicity. The cells were visualized by phase contrast microscopy (10X magnification).


If you require oligos that are approved for use in molecular diagnostics applications, or if you are interested in our OEM services, please click here.